絲印耐沖壓五金油墨

1、適用范圍：五金、金屬、玻璃、陶瓷、電鍍、大理石等材料絲印移印

2、特性：耐沖壓、耐折彎、免烘烤自干、耐酒精、耐酸堿、耐汽油、耐腐蝕。

3、技術參數：

a.粘度：8000-12000CPS；

b.細度：5UM↓、光澤：60°↑；

c.干燥條件：自干24小時；

d.鉛筆硬度：2H↑；

e.耐酒精：99%乙醇500g力來回超過30次；

f.耐磨：500g力來回超過30次；

g.過網性能：77T-145T網紗；

4、稀釋劑的選擇：稀釋劑：S-3；使用前添加10%-15%的DB-01固化劑效果更好。

5、注意事項：

a.不可與其它油墨混用；

b.使用S-3慢干稀釋劑稀釋；

c.加過固化劑的油墨必須在3小時內用完；

d.密封保存，遠離火源。

6、應急處理措施：

備注：由于材料及使用中的變數，可能是結果會有變化，以上數據僅供參考，使用前請自行測試。

1, the scope of application: no halogen ink can be printed, ABS, PC, PS, acrylic, metal, electroplating, UV surface.

2, characteristics: medium and dry, ethanol, acid resistance.

3, technical parameters:

A. viscosity: 8000-12000CPS;

B.: 5UM:: gloss, fineness of 60 degrees up;

C. dry conditions: 24 hours from dry;

D. pencil hardness: 2H up;

E. resistance to alcohol: 99% ethanol 500g force back and forth more than 30 times;

F. wear: 500g force back and forth more than 30 times;

G. n e t performance: 77T-145T;

4, thinner choice: thinner: S-3; before using the 10%-15% to add DB-01 curing agent better effect.

5, matters needing attention:

A. and other printing ink;

B. using S-3 slow dry diluent dilution;

C. plus the curing agent of the ink must be used up within 3 hours;

D. sealed to save, away from the fire source.

6, emergency treatment measures:

A. such as dipped into the eye immediately clear water cleaning, serious medical treatment,

B. fire fighting measures: dry powder, foam fire extinguisher or sand.

] Note: due to the materials and the use of variables, possibly is the change, the above data are for reference only, before using please self testing.